Huge upgrades for McLaren, Alpine and AlphaTauri revealed
| F1 Live | F1 Replay | F1 Standings |
Has Lewis Hamilton or Max Verstappen Had Better Teammates?Video of Has Lewis Hamilton or Max Verstappen Had Better Teammates?Red Bull Floor Edge – More camber in the forward portion of the floor edge wingRear Wing Endplate – The end of the flap element has a revised curl detail.Ferrari Front Wing – Reprofiled front wing flap Mercedes Front Corner – Large front brake duct inlet and exit.Alpine Sidepod Inlet – Raised and staggered sidepod inlet along with increased undercut and revised mirror housing stay and wingletsCooling Louvres – Connected to the above – revised cooling louvres to bring appropriate level of cooling with the new bodyworkBeam Wing – Taller lip on the trailing edge of the beam wingMcLaren Front Wing Endplate – New Endplate GeometrySidepod Inlet – New Sidepod Inlet ShapeHalo – New Halo FurnitureFloor Body – Fully revised FloorCoke/Engine Cover – Reshaped Sidepod and Engine CoverRear Corner – Revised Rear Brake Duct GeometryRear Suspension – Modified Rear Toelink shroudRear Wing Endplate – Updated Rear Wing Endplate GeometryBeam Wing – More Loaded Beam Wing GeometryAlfa Romeo Floor Fences – Redesigned floor fences and floor geometryDiffuser – Updated diffuser expansionRear Corner – Redesigned rear brake duct geometry, as well as realigned the suspension coversFront Wing – Updated front wing flapsAston Martin Rear Corner – The lower edge of the lower deflector has a revised profile within the allowable region for modifications.Haas No updates submitted for this event. AlphaTauri Floor Body – Relative to the baseline geometry, the rear central floor has been modified.Floor Edge – Relative to the baseline geometry, the floor edge local to the trailing edge of the forward floor fences has been modified. The rear floor edge and floor edge wing have also been revised.Related Lawson ‘won’t settle for anything less’ than 2024 F1 race seat Hamilton: Mercedes need to “level up” to catch Verstappen and Red BullDiffuser – Relative to the baseline geometry, the diffuser sidewall cut-out has been reoptimised to suit the new rear floor edge design.Sidepod Inlet – Relative to the baseline geometry, the sidepod inlet area has been reshaped.Coke/Engine Cover – Relative to the baseline geometry, the outboard bodywork has been modified. An additional cooling exit has also been added to the inboard engine cover local to the rear lower wishbone forward leg.Rear Suspension – Relative to the baseline geometry, the rear suspension shrouds have been reprofiled.Rear Corner – Relative to the baseline geometry, the rear brake drum scoop inlet has been redesigned and the scoop exit geometry revised local to the upper wing cascade.Rear View Mirrors – Relative to the baseline geometry, the mirror body has been revised. The mirror vanes have also been revised to suit the new sidepod inlet upper surface.Williams Front Wing – New, larger gurney flap available for the rearward most element of the front wing.
For motorsport news follow TRmotosports on social media.
